The guide aims at helping those who want to dismantle their laptops to offer.
You must be sure that you are the problem, the face of the hardware, and that your laptop is under warranty, that void since the dismantling of the laptop warranty.
Search the net for service manuals are free and some other costs, such as $ 6. Can not find your model? Download some free service manual from different brands and read many steps are the same for a laptop --Disassembly. But I do recommend the manual that matches your laptop, because you may need to find the part number of the defective part to change to know.
Now you have prepared a clean work area with little boxes for the various parts and screws, and remember, perhaps a pen and a paper on certain step.
To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge
Small PhillipsScrewdriver
Flathead screwdriver
Hexagonal Drivers
Tweezers
Note: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when put the components back.
When you remove the strip cover, please ensure not to scrape the cover.
In most of the laptop you can actually get from the starting point from which to access these beaches:
Battery
Memory
hardHDD
Remove them all, the optical disk just the screw securing the optical disk module, press the ODD module removed with a screwdriver and remove the ODD module from the main unit.
According to this view to see the keyboard area, such as removing the keyboard, for example, with an Acer Aspire 5100, you must remove the middle cover from the edge of the middle cover and carefully remove the center lid, then you have to do the release of two screws at the plate and keyboardcarefully disconnect the keyboard plate from the edge of the keyboard plate Finally, you can lock the keyboard FFC carefully, because it is fragile. Then remove the keyboard plate.
After that either the LCD module can dismantle or try the motherboard equipped.
For the LCD module carefully unplug the LCD cable and other cable that you can see, do not leave any screws holding the LCD module on the underside of the base unit, release, and other bolts attached to the LCDMain unit, then remove the LCD module from the main unit.
For each model of the motherboard are different then you will have to explore but do not forget to read, some service manuals before.
Here you will find some free service manuals in the laptop support.
I hope that this will give some help.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น